Exhaust temperature sensor, front, Z19DTR (602F)

/ 9-3 (9440) / 2009 / 2. Engine / 4-cylinder diesel / Exhaust emission control system / Adjustment/replacement / Exhaust temperature sensor, front, Z19DTR (602F)

To remove

1.	Raise the car.

2.	Remove the lower engine cover (A).

3.	Detach the temperature sensor (A).

4.	Detach the turbocharger oil return hose (B)

5.	Remove the front right wheel

6.	Remove the right wing liner (A).

7.	Unplug the connector (A).

8.	Remove the connector from the holder (B).

9.	Remove the A/C cable from the clip (C).

10.	Guide out the temperature sensor slightly and cut the cable tie (D).

To fit

1.	Fit a cable tie (D) around the temperature sensor cable and A/C cable.

2.	Fit th A/C cable to the clip (C).

3.	Fit the connector to the holder (B).

4.	Plug in the connector (A).

5.	Fit the right wing liner (A).

6.	Fit the front right wheel.

7.	Attach the turbocharger oil return hose (B).

8.	Fit the temperature sensor (A).

9.	Fit the lower engine cover (A).

10.	Lower the car.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.