SAAB WIS ONLINE

Pressure sensor, particle trap (744), Z19DTH

Pressure sensor, particle trap (744), Z19DTH

To remove


1. Remove the upper engine cover and insulation.

2. Remove the pressure sensor connector.


3. Remove the delivery hoses.

4. Remove the pressure switch by undoing the screw.


To fit


1. Fit the pressure switch with the screw.


2. Fit the delivery hoses.

3. Fit the pressure sensor connector.

4. Fit the insulation and the upper engine cover.

5. If a new pressure sensor is fitted : Connect the diagnostic tool to reset adaptation values. Select Menu - Engine - Engine management system - Adjustment - Particle Filt. Pressure Sens. Repl.