SAAB WIS ONLINE

Intake air sensor (688), Z19DTR

Intake air sensor (688), Z19DTR

To remove


1. Remove the engine cover.

Remove the engine cover and insulation.

2. Remove the sensor.


Unplug the sensor connector (A).

Remove the sensor (B).


To fit


1. Lubricate the sensor O-ring with acid-free Vaseline.

Important

Be careful not to damage the O-ring.


2. Fit the sensor (B).

Tightening torque 9 Nm (7 lbf ft)

Important

Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection .



Plug in the sensor connector (A).

3. Fit the insulation and the upper engine cover.