Engine mounting, right
Engine mounting, right |
To remove |
1. |
Raise the car.
|
2. |
CV:
Remove
Chassis reinforcement, front subframe, CV
.
|
3. |
Fit
83 96 145 Centring fixture, subframe - engine
on the engine's subframe and
83 96 152 Centring tool, power train
with
32 025 059 Support
. First remove the two long supports. Relieve the load from the engine.
|
4. |
Lower the car.
|
5. |
Remove the upper section of the air cleaner.
|
6. |
Remove the lower section of the air filter.
|
7. |
Remove the engine pad.
|
8. |
Remove the power steering pipe clip from the engine mounting.
|
9. |
Remove the engine mounting from the engine (some models do not have a lower bolt).
|
To fit |
1. |
Fit the engine mounting to the engine (some models do not have a lower bolt).
Tightening torque 93 Nm (69 lbf ft) |
2. |
Fit the power steering pipe clip to the engine mounting.
|
3. |
Fit the engine pad.
Tightening torque to body: 50 Nm + 180° (37 lbf ft + 180°) Tightening torque to engine mounting: 45 Nm + 90° (33 lbf ft+ 90°) |
4. |
Fit the lower section of the air cleaner.
|
5. |
Fit the upper section of the air cleaner.
|
6. |
Raise the car.
|
7. |
Remove Centring fixture, subframe and Centring tool, power train.
|
8. |
CV:
Fit
Chassis reinforcement, front subframe, CV
.
|
9. |
Lower the car.
|