SAAB WIS ONLINE

EVAP canister purge valve (321), B284

EVAP canister purge valve (321), B284

To remove


1. Remove the upper engine cover.

2. Unplug the upper connector of the engine control module.


3. Unplug the 7-pin connector.

4. Remove the nut and move the cable duct aside.

5. Detach the brake vacuum hose from the intake manifold.


6. Remove the bracket holding the crankcase ventilation pipes to the intake manifold.

7. Unplug the connector from the EVAP canister purge valve.

8. Detach the hoses from the valve.

9. Lift up the bracket with the valve and detach the pipe.


10. Remove the valve from the bracket.


To fit


1. Fit the valve to the bracket.


2. Attach the pipe to the valve and bracket. Position the bracket.

3. Attach the hose to the valve.


4. Plug in the connector of the EVAP canister purge valve.

5. Fit the bracket holding the crankcase ventilation pipes to the intake manifold.

6. Attach the brake vacuum hose to the intake manifold.

7. Reposition the cable duct and fit the nut.


8. Plug in the 7-pin connector.

9. Plug in the upper connector of the engine control module.

10. Remove the upper engine cover.