Complete exhaust system

/ 9-3 (9440) / 2009 / 2. Engine / V6 petrol / Exhaust system / Adjustment/replacement / Complete exhaust system

To remove

1.	Raise the car.

2.	Undo the nuts of the exhaust pipe clamp.

3.	Remove the exhaust system.

To fit

1.	Fit and adjust the exhaust system so it hangs neutrally. For cars with visible tailpipe, adjust such so that it is in the centre of the tailpipe opening in the rear bumper.

2.	Tighten the exhaust pipe clip. Tightening torque 40 Nm (30 lbf ft).

3.	Lower the car.

4.	Attach the exhaust hoses and start the engine. Check that there are no exhaust system leaks.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.