Belt pulley, 4-cyl diesel

/ 9-3 (9440) / 2009 / 3. Electrical System / Charging systems / Adjustment/replacement / Belt pulley, 4-cyl diesel

To remove

In the method described below, the generator has already been removed.

1.	Remove the belt pulley cover.

2.	Remove the belt pulley. Note The belt pulley is threaded anticlockwise.

To fit

1.	Fit the belt pulley. Tightening torque 80 Nm (59 lbf ft)

2.	Fit the belt pulley cover.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.