Rear light cluster, 5D

/ 9-3 (9440) / 2009 / 3. Electrical System / Lighting and signalling systems / Exterior lighting / Adjustment/replacement / Rear light cluster, 5D

To remove

1.	Remove the panel (A) and rear interior lighting (B) in the luggage compartment side trim.

2.	Unplug the connector (C).

3.	Remove the nuts (D) and lift out the light cluster.

To fit

1.	Fit the light cluster.

2.	Fit the nuts (D).

3.	Plug in the connector (C).

4.	Fit the panel (A) and rear interior lighting (B) in the luggage compartment side trim.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.