Xenon lamp
Xenon lamp |
|
|
To remove |
1. |
Turn the ignition key to the LOCK position.
|
2. |
LHD:
Remove the battery cover, air inlet pipe (A), washer fluid filler pipe (B) and the main fuse box (C).
|
3. |
Remove the xenon bulb:
|
• |
Remove the protective cover (A).
|
• |
Unplug the connector (B).
|
• |
Remove the xenon bulb (C) by turning anticlockwise. Lift the xenon bulb straight out of the headlamp.
|
• |
Undo the xenon bulb socket (D) by detaching it.
|
To fit |
Important | ||
When changing a bulb, select a new bulb of the correct rating to prevent the components being damaged. |
||
1. |
Fit the xenon bulb.
|
• |
Fit the socket (C) to the xenon bulb, paying attention to the coding.
|
• |
Carefully insert the xenon bulb (C) straight into the headlamp housing and turn clockwise to lock in place.
|
• |
Plug in the connector (B).
|
• |
Fit the protective cover (A).
|
2. |
LHD:
Fit the main fuse box (C), washer fluid filler pipe (B), air inlet pipe (A) and battery cover.
|
3. |
Clear any diagnostic trouble codes.
|