Anti-theft alarm sensor (690), 4D, 5D

/ 9-3 (9440) / 2009 / 3. Electrical System / Theft protection / Adjustment/replacement / Anti-theft alarm sensor (690), 4D, 5D

To remove

1.	Remove the lens protector from the dome light.

2.	Remove the switch panel cover.

3.	Remove the theft alarm sensor by pressing a screwdriver against the clips.

4.	Unplug the connector.

To fit

1.	Plug in the connector.

2.	Fit the theft alarm sensor. A click should be heard.

3.	Fit the switch panel cover.

4.	Fit the lens protector.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.