Fitting kit, anti-theft alarm, CV

Fitting kit, anti-theft alarm, CV

1.

Siren

2.	Siren console

3.	Bonnet switch

4.	Anti-theft alarm sensor

5.

Labels

Siren

1.	Open the luggage compartment.

2.	Remove the luggage compartment side trim, CV on the left-hand side.

3.	Remove the tape holding the cables.

4.	Fit the siren bracket. Tightening torque 8 Nm (6 lbf ft)

5.	Refit the siren. There should be an audible click.

6.	Plug in the connector to the siren.

7.	Fit the luggage compartment side trim, CV

8.	Close the luggage compartment.

Bonnet switch

1.	Open the bonnet.

2.	Remove the clip holding the cables.

3.	Plug in the connector to the bonnet switch.

4.	Fit the bonnet switch.

5.	Close the bonnet.

Anti-theft alarm sensor

1.	Remove the roof lamp from the window frame trim.

2.	Remove the two protective cases from inside the switch panel.

3.	Fit the anti-theft alarm sensor. A click should be heard.

4.	Open the hatch of the connector holder.

5.	Plug in the connector of the anti-theft alarm sensor (blue connector).

6.	Close the hatch of the connector holder.

7.	Refit the roof lamp.

8.	Select Add / Remove- Accessories - Theft Alarm and then follow the on-screen instructions.

Anti-theft alarm labels

Affix the anti-theft alarm labels, see Affixing anti-theft alarm labels .