Solenoid valve 1, 2, 3, soft top (647a, b, c)
| Solenoid valve 1, 2, 3, soft top (647a, b, c) |
| Location |
Solenoid valve 1, soft top (647a)
Solenoid valve 2, soft top (647b)
Solenoid valve 3, soft top (647c)
| Main task |
The valves control the oil flow to the hydraulic cylinders.
| Type |
Electrically operated solenoid valve.
Technical data
| Connection |
| Pin No. | Signal type | Description |
| 1 | Control voltage | The STC control module activates each valve by feeding pin 1 with B+ |
| 2 | Ground | All the valves are grounded through pin 25 on the STC control module |
The valve is grounded on pin 2 and is activated by the STC control module putting B+ on pin 1.
Every valve has three connections.
| • |
Oil pump output pressure
|
|
| • |
Oil pressure to the hydraulic cylinder
|
|
| • |
Oil return to the reservoir
|
|
The valves have two positions: "Active" and "Inactive".
When a valve is active the pump output is connected to the cylinder . When a valve is inactive the pump output is connected to the return line to the reservoir.
Diagram
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
