SAAB WIS ONLINE

Differential clutch

Differential clutch

Warning

The hydraulic pressure in the differential clutch is very high. Wait for at least 10 minutes before removing any parts from the differential clutch.


Important

It is very important to observe maximum cleanliness when working on the differential clutch. Dirt particles can seriously damage the function and service life of the differential clutch.


To remove


1. Remove complete unit, differential clutch and limited slip differential .

2. Cars with limited slip differential clutch: Remove the hydraulic pipes (A) fit tool DT-49132 (B). Turn the tool (C) slightly and pull the pipe out from the quick-release coupling.


3. Cars with limited slip differential clutch: Remove the clips for the wiring harness.

4. Remove the bolts (A) to the differential clutch.


5. Remove the differential clutch.


To fit


1. Fit the differential clutch. Tighten the bolts (A).

Tightening torque: 30 Nm (22 lbf ft)


2. Cars with limited slip differential clutch: Fit the clips for the wiring harness.

3. Cars with limited slip differential clutch: Fit the hydraulic pipes (A) to the quick-release couplings and check that the pipes are fitted firmly.


4. Fill with fluid in the differential clutch in accordance with Fluid capacity and grade of fluid .

5. Fit complete unit, differential clutch and limited slip differential .