SAAB WIS ONLINE

Selector unit B284, 4WD

Selector unit B284, 4WD

To remove


1. Remove Battery cover, lower section, B284 .

2. Remove the catalytic converter heat shields:

• Turn up the expansion tank.

• Remove the heat shields (A).


3. Remove the gear cables:

• Remove the gear cables from the shift arms (A).


• Press the locking sleeves backward and remove the cable casings from the bracket (B).

4. Blow clean around the selector unit

5. Remove the selector unit:

• The selector unit must be in neutral position to enable removal.

• Remove the bolts (C) and lift up the selector unit.


To fit


1. Fit the sealing ring (A) onto the selector unit.

• The selector unit must be in neutral position to enable fitting.


2. Fit the selector unit on the gearbox (C).

Tightening torque 25 Nm (18 lbf ft)


3. Connect the gear cables:

• Press the locking sleeves backward and fit the cable casings to the bracket (B).

• Fit the gear cables to the shift arms (A).

4. Fit the catalytic converter heat shields:

• Fit the heat shields (A).

• Fit the expansion tank


5. Adjust the gear positions in accordance with Adjusting gear cables

6. Fit Battery cover, lower section, B284

7. Carry out Measures after disconnecting the battery .