Inner track rod, B207
Inner track rod, B207 |
To remove |
1. |
Remove the front wheel.
|
2. |
Remove
outer track rod
and
steering gear membrane
.
|
3. |
Bend up the lock tabs (A) and remove the track rod (B) using tool
KKM-6247 Special wrench
or a 32 mm crow's foot wrench.
|
To fit |
Important | ||
Remove any adhesive residue from the steering gear and dust excluder. |
||
1. |
Fit the locking washer (A).
|
2. |
Fit and fasten the track rod (A). Bend in the lock tab (B) toward the inner ball joint.
Tightening torque 90 Nm (66 lbf ft) |
3. |
Fit
steering gear membrane
and
outer track rod
.
|
4. |
Fit the
wheel
.
|
5. |
Check
Wheel geometry
and adjust if necessary, see
Wheel alignment
.
|