Wheel bolt, replacing
Wheel bolt, replacing |
Note | ||
It is not necessary to remove the wheel when replacing one or more wheel bolts. |
If all wheel bolts are to be replaced, replace one at a time and torque tighten as follows.
Aluminium wheel |
Oil the bolt threads.
Tightening torque: 110 Nm (81 lbf ft)
Pressed steel wheels |
Tightening torque: 50 Nm +90° +90°, max 110 Nm (37 lbf ft +90° +90°, max 81 lbf ft)
Note | ||
To avoid tightening the bolts too hard when fitting steel wheels, angle tighten with a torque wrench set to 110 Nm (81 lbf ft). If the torque wrench indicates that 110 Nm (81 lbf ft) has been reached, stop tightening. |