Headlamp frame
Headlamp frame |
To remove |
When removing the headlamp frame, it will be necessary to also remove the bumper member with integrated collision box.
1. |
Drill out the two upper spot welds.
|
2. |
Unscrew the 2 upper bolts.
|
3. |
Drill out the spot welds to the wheel housing and side member.
|
4. |
Knock loose the headlamp frame and pull it up from the collision box.
|
To fit |
Align the surfaces where the spare part is being fitted. Apply welding primer to the places to be welded and rustproof the drilled surfaces.
1. |
Put in place the headlamp frame between the collision box and the member. Position the frame to the wheel housing and collision box.
|
2. |
Plug or spot weld as illustrated. The welds on the collision box joint need not be restored as they are only for production purposes.
|
3. |
Grind the welds.
|
4. |
Fit the bolts.
|
5. |
Wash away surplus welding primer. Welding primer reduces the adhesion of paint, filler and sealant.
|
6. |
Apply primer to all bare metal surfaces.
|
7. |
Apply rust protector after painting. Use Terotex HV 400.
|