Rear roof member, 5D
Rear roof member, 5D |
To remove |
1. |
Remove
Roof, 5D
.
|
2. |
Drill out the spot welds on top.
|
3. |
Drill out the spot-welds on the inside.
|
4. |
Knock away the roof member and align any deformed metal.
|
To fit |
1. |
Grind all surfaces that are to be welded.
|
2. |
Apply welding primer to the surfaces that are to be welded.
|
3. |
Put in place the roof member and secure with a few welding clamps.
|
4. |
Spot weld on the roof member on the outside.
|
5. |
Spot weld on the roof member on the inside.
|
6. |
Wash away surplus welding primer. Welding primer reduces the adhesion of paint, filler and sealant.
|
7. |
Fit
Roof, 5D
.
|