Cover, rear switch, window lift

/ 9-3 (9440) / 2009 / 8. Body / Glass, windows and mirrors / Adjustment/replacement / Cover, rear switch, window lift

To remove

1.	Remove Rear door trim

2.	Remove the door module.

•

First detach the rear clip (A). Use a screwdriver.

•

Then detach the clips (B) on the sides of the door module.

•

Carefully pull the door module backwards/downwards.

3.	Remove the cover.

•

Detach the locking catches (A) from their mountings. Important Make sure that the catches do not fasten in the trim.

•

Remove the cover by pressing it upwards. Use a screwdriver.

To fit

1.	Fit the cover.

2.	Fit the door module. Make sure that the retaining clips lock (A/B).

3.	Fit Rear door trim .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.