DDM / B3933 2B
Read the instructions below then
start the fault diagnostic procedure.
Symptom: No express function, window up/down.
Window Motor Hall Sensor 2, No Motion Detected
Fault symptom
No express function, window up/down.
On-board diagnosis
Type of diagnosis:
| Diagnostics run when power window is operated. |
Enable criteria:
| The following DTCs are generated at the same time as this DTC: |
| This DTC will not be generated if the following DTCs exist: |
Fault criteria:
| No signal from Hall sensor 2. |
System reaction to a fault:
| No express function, window up/down. |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
Diagnosis regards:
| Electrical fault in connecting leads or component. |
