EDC16 / P0380 14
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Possibly difficult to start and/or engine jerk.
Glow Control Unit, Power Supply, Open Circuit
Fault symptom
Possibly difficult to start and/or engine jerk.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
| The glow control module has no power supply. |
Checking the wiring harness
| • | Faults in the control module female connector can be the cause of the DTC. Check the connector with respect to oxidation, depressed pins and pin clamping force. |
| • | Jiggle the wiring harness at several points to detect intermittent breaks or short circuits. Check also the connector for oxidation or loose pins. |
Diagnostic help
Diagnosis regards:
| Electrical fault in connecting leads or component. |
Functions in the diagnostic tool related to the fault:
