Idler wheel, balancer shaft chain circuit

/ 9-3 (9440) / 2010 / 2. Engine / 4-cyl petrol/E85 / Basic engine / Adjustment/replacement / Idler wheel, balancer shaft chain circuit

To remove

1.	Remove the balancer shaft chain .

2.	Remove the idler wheel bolts (A).

To fit

1.	Fit the idler wheel bolts (A). Tightening torque 10 Nm (7 lbf ft)

2.	Fit the balancer shaft chain .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.