(TA248-0828) Throttle adaptation after power disruption
| TECHNICAL ADVICE - Quick information for your help | |
| Bulletin Nbr: | TA248-0828 |
| Date: ........... | March 2008 |
| Market: | All |
| Throttle adaptation after power disruption |
| VEHICLES CONCERNED |
Saab 9-3SS/CV/SC MY 06- with B284-engine (HFV6).
| BACKGROUND |
DTC P2176 is sometimes reported without a failure present, due to that throttle adaptation has been interrupted.
| CONDITIONS |
When throttle housing, engine ECU or battery is replaced, throttle need 10 sec. after ignition on, to learn min and max level.
| SYMPTOM DESCRIPTION |
Illuminated MIL (Malfunction Indication Light).
| ACTION |
When work shop has replaced throttle housing, engine ECU, battery or if there has been a power disruption due to other circumstances, please turn ignition on for 10 sec. before starter engine is activated. Throttle will learn min and max limit during this time.
This is a one time action and is not needed until next time one of the above conditions occur.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
