Checking residual pressure
|
Checking residual pressure
|
Warning
|
Checking residual pressure involves partial dismantling of the car's fuel system. The following points must therefore be observed in connection with this work:
|
•
|
Ensure good ventilation! If there is approved ventilation for extraction of fuel fumes then this must be used.
|
•
|
Wear protective gloves! Prolonged exposure of the hands to fuel can cause irritation of the skin.
|
•
|
Have a fire extinguisher class BE at hand! Be aware of the risk for sparks, i.e. in connection with circuit breaking, short-circuiting, etc.
|
•
|
Absolutely no smoking!
|
•
|
Use protective goggles.
|
|
|
|
|
2.
|
Run the pump with the diagnostic tool until the pressure gauge stops rising. Stop the pump. The residual pressure after 20 minutes must be min. 2.3 bar (33 psi).
|
3.
|
Take a reading on the pressure gauge equipment.
|
4.
|
"Safety on" the adapter and remove the pressure measuring equipment from the service nipple. Wipe up any fuel spill with a rag.
|