Engine pad, right, Z19DTR
Engine pad, right, Z19DTR |
To remove |
1. |
Raise the car.
|
2. |
CV: Remove
Chassis reinforcement, front subframe, CV, diesel
.
|
3. |
Remove the lower engine cover.
|
4. |
Fit
83 96 145 Centring fixture, subframe - engine
on to the engine subframe and
83 96 368 Supplementary kit to centring fixture
32 025 007 Mounting fixture
. Use only the front mounting fixture applied against the A/C compressor bracket. Take the strain off the engine bracket by adjusting the fixture.
|
5. |
Lower the car.
|
6. |
Detach the mass air flow sensor's connector (A), wiring harness (B), hose (C) and the air filter housing's cover (D) and filter. Plug the intake manifold with a clean cloth.
|
7. |
Remove the air filter housing.
|
8. |
Remove the engine pad on the right side (A).
|
To fit |
1. |
Fit the right-hand engine pad.
Tightening torque on engine, 50 Nm (37 lbf ft) Tightening torque to body 40 Nm + 60° (30 lbf ft + 60°). |
2. |
Raise the car.
|
3. |
Remove
32 025 007 Mounting fixture
.
|
4. |
Fit the bolt to the A/C compressor bracket.
Tightening torque 50 Nm (37 lbf ft) |
5. |
Remove
83 96 145 Centring fixture, subframe - engine
|
6. |
Fit the lower engine cover.
|
7. |
CV: Fit
Chassis reinforcement, front subframe, CV, diesel
.
|
8. |
Lower the car.
|
9. |
Fit the air filter housing.
|
10. |
Remove the cloth from the turbocharger intake manifold. Fit the filter, air filter housing cover (D), hose (C), wiring harness (B) and mass air flow sensor connector (A).
|