SAAB WIS ONLINE

Oil filter, Z19DTR

Oil filter, Z19DTR

To remove


1. Remove the lower engine cover

• Raise the car.

• Remove the lower engine cover.

2. Place a receptacle under the car.

3. Remove the oil filter.

• Connect a hose to the drain pipe of the oil filter holder (A).


• Use 32 025 051 Oil filter spanner to undo the oil filter cover and let the oil run out through the hose (B).

• Remove the cover.

• Remove the oil filter (C).



To fit


1. Fit the oil filter.

• Fit new O-rings.

• Position the oil filter in the cover.

• Fit the cover.

Tightening torque 25 Nm (18 lbf ft)

• Wipe up any spilled oil.

2. Fit the lower engine cover.

3. Lower the car.

4. Fill with oil to specification. See Lubricating system . Check the level when the engine is warm, 2-5 minutes after it is switched off.