SAAB WIS ONLINE

Valve spring, Z19DTH

Valve spring, Z19DTH

To remove


1. Remove Cylinder head in-car, Z19DTH.

2. Remove the coolant pump with gasket (A)


3. Fit 32 025 053 Holder (A).


4. Position the cylinder head in an engine stand.

5. Remove the hydraulic valve tappets with rocker arms (A)


6. Remove the valve spring:

• Remove the valve cones (A) using 83 96 384 Valve spring tool


• Remove the valve shim (B) and the valve spring (C).


7. Repeat the procedure for replacing the other valve springs.


To fit


1. Fit the valve spring:

• Fit the valve shim (B) and the valve spring (C).


• Fit the valve cones (A) using 83 96 384 Valve spring tool .


2. Fit the hydraulic valve tappets with rocker arms (A).


3. Remove the cylinder head from the engine stand.

4. Remove the tool 32 025 053 from the cylinder head (A)


5. Fit the coolant pump with gasket (A).

Tightening torque 8 Nm (6 lbf ft)


6. Fit Cylinder head in car, Z19DTH