Glow plug (398), Z19DTH

/ 9-3 (9440) / 2010 / 2. Engine / 4-cylinder diesel / EDC 16 engine management system / Adjustment/replacement / Glow plug (398), Z19DTH

To remove

1.	Remove the upper engine cover and insulation.

2.	Remove the connector. Take care during removal not to damage the connector.

3.	Blow clean around the glow plugs. Undo and remove them using a 9 mm deep socket.

To fit

1.	Fit the glow plug. Use a 9 mm deep socket. Tightening torque 10 Nm (7 lbf ft)

2.	Fit the connector.

3.	Fit the insulation and the upper engine cover.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.