SAAB WIS ONLINE

Checklist for replacing turbocharger and engine control module EDC16

Checklist for replacing turbocharger and engine control module EDC16

Checklist


1. Describe the fault symptom ..................................................................................................................

..................................................................................................................

...................................................................................................................

2. Connect Tech 2.

3. Turn off A/C or ACC and let the engine idle. Coolant temperature should be over 80°C.

Note

Do not erase diagnostic trouble codes.


4. Read and note any diagnostic trouble codes: ...........................................................................................................

5. Choose "Engine" - "EDC16" - "Read value / Activate" in Tech 2. Read and note the following values:


Unit Ignition On Idle Desired value
Engine speed rpm 700-1000
Mass air flow g/s 10-25
Coolant temperature °C 80-100
Swirl throttle actuator % 3-90
Fuel temperature °C 20-80
Atmospheric pressure kPa 90-115
Charge air control, PWM, pre-turbo kPa 95-115
Camshaft rotation speed rpm 300-500
Fuel pressure bar 300-1600
Requested fuel pressure bar 300-1600
Actuator EGR, position % 3-95
Accelerator Pedal % 0-100
Pedal position sensor 1 V 0.50-1.50
Pedal position sensor 2 V 0.25-0.75
Battery Voltage V 13-15
Soot density, particle filter, exhaust system % 0-100
Particle filter pressure sensor, exhaust system kPa 0-700




Mileage since last regeneration (Tech2: Dist. since PF regeneration) .................................

The following information is available under “system information”

Vehicle Identification Number (VIN)
Saab spare parts number (P/N)
Hardware number
Software number
Programming Date