Solenoid valve, charge air (179aH), (179aL), Z19DTR
|
|
Solenoid valve, charge air (179aH), (179aL), Z19DTR
|
|
Important
|
|
Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to
Connectors, handling and inspection
.
|
|
|
|
1.
|
Solenoid valve (A), charge air, high-pressure turbo (179aH), (upper turbo).
Solenoid valve (B), charge air, low-pressure turbo (179aL), (lower turbo).
|
|
2.
|
Detach the solenoid valve connector (C).
|
|
3.
|
Remove the solenoid valve vacuum hoses (D).
|
|
4.
|
Remove the solenoid valve from the holder (E).
|
|
1.
|
Fit the solenoid valve to the holder (E).
|
|
2.
|
Fit the solenoid valve vacuum hoses (D).
|
Important
|
|
Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to
Connectors, handling and inspection
.
|
|
|
|
|
3.
|
Attach the solenoid valve connector (C).
|
