SAAB WIS ONLINE

Engine mounting, left-hand

Engine mounting, left-hand

To remove


1. Place covers over the wings to keep the paintwork clean and protect it from damage.

2. Remove the battery.

3. Remove the battery tray.


4. Unload the power train using a jack under the gearbox.

5. Remove the engine pad bolts from the gearbox.


6. Lower the power train.

7. Remove the engine pad bolts from the body.

8. Remove the engine pad.


Fitting of right-hand torque arm


1. Fit the engine pad into place. Tighten.

Tightening torque 15 Nm + 30° (11 lbf ft + 30°)


2. Raise the power train.

3. Fit the engine pad bolts to the gearbox but do not tighten.

4. Raise the car.

5. CV: Remove the cross braces. See Chassis reinforcement, front subframe, CV .

6. Fit 83 96 152 Centring tool, power train to the subframe. See also Centring tool, engine and subframe .


7. Lower the car.

8. Tighten the engine pad bolts to the gearbox.

Tightening torque: 70 Nm + 45° (52 lbf ft + 45°)


9. Fit the battery tray and the battery.


10. Raise the car and remove 83 96 152 Centring tool, power train from the subframe.

11. Fit the cross brace. See Chassis reinforcement, front subframe, CV .

12. Lower the car and remove the wing protectors.

13. Carry out Procedures after reconnecting the battery