Front crankshaft seal

/ 9-3 (9440) / 2010 / 2. Engine / V6 petrol / Basic engine / Adjustment/replacement / Front crankshaft seal

To remove

1.	Remove Crankshaft pulley .

2.	Remove the seal using 87 91 360 Extractor

To fit

1.	Clean the sealing surfaces.

2.	Lubricate the new seal with non-acidic Vaseline.

3.	Fit the seal using EN-47635 Fitting tool and a plastic mallet.

4.	Fit Crankshaft pulley .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.