SAAB WIS ONLINE

Rear crankshaft seal

Rear crankshaft seal

To remove


1. Remove the Power train or Power train, 4WD .

2. Remove Camshaft covers, removed engine.

3. Remove Timing cover.

4. Remove Oil sump .

5. Remove the flywheel or driver plate using EN-46106 Flywheel locking attachment as a holding tool.


6. Remove the rear seal of the crankshaft.


7. Clean the parts and remove gasket residue.


To fit


1. Apply a 2 mm thick bead of 93 160 951 Flange sealant as illustrated.


2. Fit the crankshaft's rear seal using EN-47839 Fitting tool as a guide.

Tightening torque 10 Nm (7 lbf ft)


3. Fit the flywheel or driver plate using EN-46106 Flywheel locking attachment as a holding tool. Apply Thread locking adhesive, Loctite 270 to the bolts.

Tightening torque: 30 Nm +45° (22 lbf ft +45° )


4. Fit the Oil sump .

5. Fit Timing cover.

6. Fit Camshaft covers, removed engine .

7. Fit the Power train or Power train, 4WD .