SAAB WIS ONLINE

Exhaust system assembly, 4WD

Exhaust system assembly, 4WD

To remove


1. Raise the car.

2. Remove the bushing bolts (A) and move aside the anti-roll bar (B).


3. Undo the exhaust pipe clamp (A).


4. Remove the nut of the exhaust pipe mounting (A).


5. Detach the silences from the rear mountings (A).


6. Remove the exhaust system.


To fit


1. Fit the exhaust system so that it hangs evenly.

2. Fit the nut of the exhaust pipe mounting (A).


3. Tighten the exhaust pipe clamp (A).

Tightening torque 40 Nm (30 lbf ft).


4. Reposition the anti-roll bar (B) and fit the bushing bolts (A).

Tightening torque 30 Nm (23 lbf ft)


5. Lower the car.

6. Connect exhaust hoses and start the engine. Check that the exhaust system does not leak.