SAAB WIS ONLINE

Throttle body actuator unit (604)

Throttle body actuator unit (604)

To remove

Important

Always use wing covers when working in the engine bay.


Before replacement, Procedure before control module removal must be carried out.


1. Remove the engine cover.


2. Remove the power steering fluid reservoir bolt. Put the reservoir aside.

3. Unplug the connector of the intake air sensor (688).

4. Remove the charge air pipe.

5. Remove the throttle body bolts.


6. Unplug the conenctor and lift away the throttle body.



To fit


1. Clean the sealing surfaces. Position the throttle body using a new seal. Plug in the connector.


2. Fit the throttle body bolts.

Tightening torque 9 Nm


3. Replace the charge air pipe.


4. Plug in the connector of the intake air sensor (688).

5. Position the power steering fluid reservoir and fit the bolt.

6. Fit the engine cover.

7. If a new throttle body has been fitted: Connect the diagnostic tool for programming. Select Diagnosis / Select model year / Saab 9-3 Sport (9440) / All / Add/Remove / Other components / 2.8T - Replaced Throttle Body.