Converting connector, radio antenna (624a), CV

/ 9-3 (9440) / 2010 / 3. Electrical System / Audio System / Adjustment/replacement / Converting connector, radio antenna (624a), CV

To remove

1.	Remove the glove box .

2.	Bend aside the sound insulation and unplug the connectors from the converting connector.

3.	Remove the converting connector.

To fit

1.	Fit the converting connector. Tightening torque 8 Nm (6 lbf ft)

2.	Plug in the converting connector.

3.	Reposition the sound insulation.

4.	Fit the glove box .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.