SAAB WIS ONLINE

Radio receiver, satellite radio, CV

Radio receiver, satellite radio, CV

To remove


1. Carry out procedures before removing a control module.

2. Remove right-hand rear side trim .

Important

Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection .


3. Remove the console (A) for the satellite radio receiver.


4. Unplug the connectors (B) for the satellite radio receiver.



To fit


1. Plug in the connectors (B) for the satellite radio receiver.

Important

Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection .



2. Fit the console (A) for the satellite radio receiver.


3. Fit right-hand rear side trim .

4. Carry out Procedure after control module replacement .

5. Carry out satellite radio receiver, activation .