High level brake light, 5D

/ 9-3 (9440) / 2010 / 3. Electrical System / Lighting and signalling systems / Exterior lighting / Adjustment/replacement / High level brake light, 5D

To remove

1.	Open the tailgate.

2.	Remove Window covers, tailgate, 5D .

3.	Remove the rubber plugs.

4.	Remove the nuts.

5.	Close the tailgate.

6.	Lift up the spoiler.

7.	Unplug the connector.

8.	Detach the hose to the washer nozzle.

9.	Remove the brake light bolts and lift out the brake light.

To fit

1.	Make sure the spoiler seals are in place.

2.	Fit the brake light. Fit the brake light bolts.

3.	Attach the hose to the washer nozzle.

4.	Plug in the connector.

5.	Fit the spoiler.

6.	Open the tailgate.

7.	Fit the nuts.

8.	Fit the rubber plugs.

9.	Fit Window covers, tailgate, 5D .

10.	Close the tailgate.

11.	Check brake light function.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.