High-level brake light, CV
| High-level brake light, CV |
| To remove |
| 1. |
Open the boot lid.
|
|
| 2. |
Remove the boot lid trim.
|
|
| 3. |
Unplug the connector.
|
|
| 4. |
Undo the brake light retaining nuts and lift out the brake light.
|
|
| To fit |
| 1. |
Refit the brake light and tighten the retaining nuts.
|
|
| 2. |
Plug in the connector.
|
|
| 3. |
Refit the boot lid trim.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
