Light cluster, boot lid, CV

/ 9-3 (9440) / 2010 / 3. Electrical System / Lighting and signalling systems / Exterior lighting / Adjustment/replacement / Light cluster, boot lid, CV

To remove

1.	Remove the boot lid trim.

2.	Unplug the light cluster connector.

3.	Remove the light cluster nuts. Remove the light cluster.

4.	If the light cluster is to be replaced, the fittings and bulbs must be transferred to the new lamp.

To fit

1.	Make sure the seal is intact and in place. Put the light cluster in position. Fit and tighten the light cluster nuts.

2.	Plug in the light cluster connector.

3.	Refit the boot lid trim.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.