SAAB WIS ONLINE

Xenon lamp

Xenon lamp

Warning

HIGH TENSION

Xenon lamp actuators and ignition transformers generate voltages of over 23,000V. Such voltages can be lethal for persons with heart problems or who have a pacemaker. Therefore, handle this system with great respect and turn off the ignition before touching any of the parts in the system.


Warning

Read Safety and handling instructions, xenon headlamps before starting work.


To remove


1. Turn the ignition key to the LOCK position.

2. LHD: Remove the battery cover, air inlet pipe (A), washer fluid filler pipe (B) and the main fuse box (C).


3. Remove the xenon bulb:

• Remove the protective cover (A).


• Unplug the connector (B).


• Remove the xenon bulb (C) by turning anticlockwise. Lift the xenon bulb straight out of the headlamp.

• Undo the xenon bulb socket (D) by detaching it.



To fit

Important

When changing a bulb, select a new bulb of the correct rating to prevent the components being damaged.



1. Fit the xenon bulb.

• Fit the socket (C) to the xenon bulb, paying attention to the coding.


• Carefully insert the xenon bulb (C) straight into the headlamp housing and turn clockwise to lock in place.


• Plug in the connector (B).

• Fit the protective cover (A).


2. LHD: Fit the main fuse box (C), washer fluid filler pipe (B), air inlet pipe (A) and battery cover.


3. Clear any diagnostic trouble codes.