Contact, clutch, immobiliser (411) US/CA

/ 9-3 (9440) / 2010 / 3. Electrical System / Starting system / Adjustment/replacement / Contact, clutch, immobiliser (411) US/CA

To remove

1.	Remove the acoustic baffle on the driver's side. NEW ILLUSTRATION 9-3_1

2.	Pull out the contact's push rod and locking sleeve.

3.	Compress the lock tabs and remove the contact (A).

4.	Unplug the connector (B)

To fit

1.	Plug in the connector (B) NEW ILLUSTRATION 9-3_1

2.	Pull out the contact's push rod and locking sleeve.

3.	Fit the contact. Note The contact must fit the coding in the bracket.

4.	Fit the acoustic baffle on the driver's side.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.