Phone holder, UHP

/ 9-3 (9440) / 2010 / 3. Electrical System / Telematics / Adjustment/replacement / Phone holder, UHP

To remove

1.	Remove the phone holder (A) from the floor console's storage compartment by lifting the holder and unhooking the lower hook.

2.	Unplug the connector (B) and the antenna connection (C).

To fit

1.	Plug in the connector (B) and the antenna (C).

2.	Fit the phone holder (A).

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.