Anti-theft alarm sensor (690), CV

/ 9-3 (9440) / 2010 / 3. Electrical System / Theft protection / Adjustment/replacement / Anti-theft alarm sensor (690), CV

To remove

1.	Remove the roof lamp from the window frame trim.

2.	Remove the anti-theft alarm sensor by pressing a screwdriver against the clip.

3.	Unplug the connector.

To fit

1.	Plug in the connector.

2.	Fit the anti-theft alarm sensor. There should be an audible click.

3.	Refit the roof lamp.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.