SAAB WIS ONLINE

(383-2571) Modified anti-theft alarm configuration

Symptom: If the incorrect parameters are selected, the message "ALARM FAILURE, CONTACT WORKSHOP" in SID. The following DTCs could occur in BCM: B3095, B3812 and B3938.

TECHNICAL SERVICE BULLETIN
Bulletin Nbr: 383-2571
Date: ........... JuliĀ 2005
Market: US/CA
Modified anti-theft alarm configuration

This bulletin describes how "Add BCM" is to be carried out in order to prevent faults from arising in the anti-theft alarm system.

Cars affected

Saab 9-3 (9440) M04- with anti-theft alarm

Background

The lock of the fuel filler flap has been eliminated as of M04. During the course of M04, the ultrasound sensor that was previously part of the anti-theft alarm system was also eliminated.

Once "Add BCM" has been carried out, it is important to select the correct parameters for the anti-theft alarm's configuration in order to prevent faults in the anti-theft alarm system.

Symptom description

If the incorrect parameters are selected, the message "ALARM FAILURE, CONTACT WORKSHOP" in SID.

The following DTCs could occur in BCM: B3095, B3812 and B3938.



Note

The fault symptom first arises when the anti-theft alarm has been armed by locking with the remote control.


Procedure

The following selections for anti-theft protection should be selected in Tech2 when "Add BCM" is carried out:

M04-

Parameter Select Option
Fuel filler flap: Non-lockable fuel filler flap


M04 up to VIN 41037151 (4D), 46013575 (CV)

Parameter Select Option
Anti-theft alarm: With
Ultrasound sensor: With
Tilt sensor: Without
Alarm, acoustic indicator: With horn sound


From VIN 41037152 (4D), 46013576 (CV)

Parameter Select Option
Anti-theft alarm: With
Ultrasound sensor: Without
Tilt sensor: Without
Alarm, acoustic indicator: With horn sound


Warranty/Time Information