DSM
DSM |
Before changing the DSM, perform Preparations prior to removing a control module .
Removing |
1. |
Remove the
front seat
.
|
2. |
Remove the front seat cowl.
|
3. |
Remove the upholstery strip from the front edge of the seat base.
|
4. |
Remove screws securing the DSM.
|
5. |
Undo and remove the clip holding the DSM. Remove the DSM.
|
6. |
Unplug the DSM.
|
Fitting |
Important | ||
Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection . |
||
1. |
Plug in the DSM.
|
2. |
Position the DSM.
|
3. |
Fit the clip to the DSM.
|
4. |
Secure the clip fit the DSM.
|
5. |
Fit the upholstery strip to the front edge of the seat base.
|
6. |
Fit the front seat cowl.
|
7. |
Fit the
front seat
.
|
Perform the procedure for after fitting a control module .