Check list, is filled in before changing transmission
Check list, is filled in before changing transmission |
Completed by, name: | Importer no: | Dealer no: |
Date: | Telephone: | Transmission:............ Clutch:............. Flywheel:........... |
Mileage: | Model: | Gearbox serial number: |
Engine Type: | Vehicle Identification Number: | |
The customer's description of the fault symptoms: |
Notes...................................................................................
DTCs:......................................................................................
System, (CIM, TCM, ECU etc.)...................................................
Write X in appropriate boxes
Operation | Noise | ||||
Symptoms | Gears | Velocity | Noise | Driving conditions | Occurrence |
No forward gears | N-1 | 0 | Wind whistle | Acceleration | Always |
No reverse gear | N-R | 0-20 | Grinding noise | Deceleration | Often |
Difficult to select a gear | 1-2 | 20-40 | Grating noise | Acceleration and deceleration | Sometimes |
Noise | 2-1 | 40-60 | Rattling noise. | Constant speed | Cold engine |
Vibrations | 2-3 | 60-80 | Other.......... | Engine idling | Hot engine |
The gear disengages | 3-2 | 80-100 | Clutch pedal not depressed | Number of times per week.......... | |
Vibrations | 3-4 | 100-120 | Clutch pedal 25% depressed | ||
4-3 | 120- | Clutch pedal 50% depressed | |||
4-5 | Miles | Clutch pedal 100% depressed | |||
5-4 | km | ||||
5-6 | |||||
6-5 |
Visual Inspection | Other points to check | |
Damaged | Leakage in the hydraulic system | Gearbox/selector lever cable |
Oil leaks | Master Cylinder | Incorrect oil level |
Not an approved part | Delivery pipe | Incorrectly positioned selector lever cable |
A part is missing | Slave cylinder | Poorly fitted drive shaft |
Loose part | Poor fit of gearbox to engine | |
Leakage |
Mark the position of any leaks on the illustrations below