Power steering return line, B284 RHD
Power steering return line, B284 RHD |
Important | ||
Scrupulous cleanliness must always be observed during all work with hydraulic components. |
||
Important | ||
Always use wing covers when working in the engine bay. |
||
To remove |
1. |
Open the reservoir cap.
|
2. |
Raise the car.
|
3. |
Place a receptacle under the car. Detach the delivery line and the return line from the steering gear. Plug the lines.
|
4. |
Lower the car to the floor.
|
5. |
Remove the upper engine cover. Detach the fuel line and tank bleed line from the power steering fluid reservoir.
|
6. |
Remove the bolt of the power steering fluid reservoir.
|
7. |
Remove the return line clip.
|
8. |
Lift up the reservoir and detach the return line.
|
To fit |
1. |
Position the return line.
|
2. |
Raise the car.
|
3. |
Fit the return line and delivery line to the steering gear using new O-rings.
Tightening torque 12 Nm (9 lbf ft) |
4. |
Lower the car to the floor.
|
5. |
Fit the line to the power steering fluid reservoir.
|
6. |
Fit the power steering fluid reservoir.
|
7. |
Fit the return line clip.
|
8. |
Fit the fuel line and tank bleed line to the power steering fluid reservoir.
|
9. |
Fit the upper engine cover.
|
10. |
Fill the power steering fluid according to specification,
bleed the power steering system
and check for leaks.
|