Rear wing liner
Rear wing liner |
To remove |
1. |
Remove the wheel.
|
2. |
Remove the nuts and bolts of the wing liner.
|
3. |
Detach the wing liner from the studs.
|
4. |
Detach the wing liner from the edge of the wing, starting from the back. Detach it little by little from the entire wing edge. Lift it aside.
|
To fit |
1. |
Angle the wing liner into place. Fit the bottom edges of the liner against the wheel housing.
|
2. |
Guide the liner onto the upper stud. Then fit it onto the other studs.
|
3. |
Align the wing liner with the edge of the wing and bumper shell. The tabs on the bumper shell should be inside the wing liner.
|
4. |
Check the fit of the wing liner.
|
5. |
Fit all nuts and bolts.
|
6. |
Fit the
wheel
.
|