SAAB WIS ONLINE

Wing moulding, front, 9-3X

Wing moulding, front, 9-3X

To remove


1. Remove Wing liner, front.

2. Press in the locking tab (A) on the clips, pull out the front section of the wing moulding (B) and the unhook the catch (C) from the bumper shell.


3. Press BO-50110 Removal tool (A) over the wing moulding's clips (B) and remove the moulding. Start at the front edge.



To fit


1. Fit the moulding. Start at the rear edge.

2. Fit the wing moulding (B) to the bumper shell, clips (A) and catch (C).


3. Fit Wing liner, front.